MUNBYN IRT01, User Manual

Page: 33 / 36

6. Battery Operation
The device battery is polymer type battery and immovable, which should
only be charged by using original power adapter. Do not store battery in hot,
humid, or corrosive environment. Do not break or crack battery. Do not store
battery when it is fully charged completely drained.
Notes:
1. The battery should be charged before the first use.
2. Since the battery only retains a small amount of power when leaving the
factory, it must be charged before use.
3. If the product will not be used for a long time, please charge the machine
at least once every two months.
4. When charging, the LED light is steady red, and when the battery is fully
charged, the LED light is steady green.
5. If the battery is exhausted, it may not turn on immediately after plugging in
the charger. This is a normal phenomenon. Please continue charging for a
while, and then turn it on again.
6. Battery charging time varies with temperature conditions and battery
usage, please charge within a reasonable temperature range.
7. When the battery power is low, the device will pop up a low battery prompt.
8. When the battery power is too low, the device will automatically shut down.
31