MUNBYN IPDA080, User Manual

Page: 16 / 36

3.4 Trigger mode
Auto mode: manually trigger the scanning function.
Press the scanning key and laser light or supplementary
light will be shown. The light will not go out until
decoding is completed or scanning times out;
Continuous mode: manually trigger the scanning
function. In the continuous scanning mode, the
scanning laser or supplementary image light will not go
out after decoding. Instead, decoding will sustain;
Manual mode: manually trigger the scanning
function. Press the scanning key and laser light or
supplementary light will be shown. Release the key and
the light will go out. In addition, the scanning light will
also go out after decoding;
3.5 Output by keyboard
Check this mode and the scanning results will be output
to the app focus edit box in the foreground by keyboard.
Cancel checking this mode and output will be done by
broadcast.
13