SPLITTER 2
security.multplx.com
1
TO INSTALL:
SPLITTER 2
1
.
Loop cable around the product.
3
.
Connect the power and alarm cable.
4
.
Attach the Pendant to the cable
and close the Pendant with the J-Plug
logo facing you.
Pendant
J-Plug Splitter 2
5
.
Using the Tetrakey screw clockwise to
secure the Pendant.
2
a.
Using the Tetrakey rotate anti-clockwise
to release the Pendant.
b.
Lift and open the Pendant.
a
b
TO INSTALL:
SPLITTER PUCK
1
a
. Use the Drilling Template to mark out the
mounting hole (1) along with the
power cable slot (2).
b
. Carefully drill and cut-out the marked
mounting points.
When using adhesive only
drill power cable slot (2)
1
1 2
2
a
. Slide the power cable into the power cable
cut-out slot and align the Splitter Puck
over the mounting holes.
b
. Screw in the two M5 Screws (not included).
a
b
3
. Connect the Standard, Boost or Boost plus
power cable to Splitter Puck connection.
On connection there will be a red LED
followed by a
‘
beep
’
.
LED
