Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 181 / 208

2. Open the hose clamps (1,4) of the hoses (2, 3) at the end of the coulter and pull the hoses
off of the coulter.
Figure. 7.9.1.1. - 246. Dismounting a coulter
3. Remove the bottom cylinder mounting bolt (4) M20 X 75.
4. Loosen the 4 mounting bolts (1) of the coulter.
Do not remove the bolt right away but loosen all four bolts equally.
5. Remove the bolts (1), installation plate (2) and 4 dampening rubbers (3).
6. Move the coulter from its location.
7.9.1.2. Installing a coulter
DANGER
Use a lifting aid to lift and move the coulter. The coulter weighs more than 60 kg and
has sharp edges.
1. Move the coulter to its location.
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
181 (208)