Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 170 / 208

7. Raise the wheel assembly slightly off the ground.
Figure. 7.4.1. - 226. The wheel assembly is supported by bolts
The intact wheel assemblies remain supported by the bolts (1).
DANGER
Exercise caution when the wheel assembly comes loose.
7.4.2. Disassembling a wheel assembly
Figure. 7.4.2. - 227. Detaching a ange bearing
1. Open the locking screw (1).
2. Remove the ange bearing (2) from the axle.
Use an extraction tool to detach the bearing. Do not use a hammer to try to
detach the bearing.
If needed, replace the bearing.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
170 (208)