Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 109 / 208

6.6.12. Adjusting the shut-off plate position in the feeder units of the
small seed hopper
Figure. 6.6.12. - 131. Adjusting the shut-off plate position in the feeder units of the small seed hopper
1. Adjust the position of the shut-off plates (1) by the material to be seeded.
When seeding meadow fescue and ryegrass, the shut-off plate must be closed
two notches.
When seeding clover, the shut-off plate must be closed three notches.
All shut-off plates should be in the same position.
6.7. Filling the hoppers
DANGER
Falling hazard when performing work on the platform. Be careful when performing
work on the platform. Accessing the steps of the platform is allowed only when the
machine is lowered.
Figure. 6.7. - 132. Working platform stairs
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
109 (208)