Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 89 / 189

6.6.10. Adjusting the width of the small seed feeder roller
Figure. 6.6.10. - 103. Adjusting the width of the small seed feeder roller
1. Adjust the width of the feeder roller to the settings provided in the seeding table by using
the screw-type control wheel on the right-hand side of the small seed hopper.
The seeding tables are provided in section 6.5. Seeding quantities.
The main scale of seeding quantity is on the control wheel lock (2) and the
secondary scale on the control wheel rim (1).
Figure. 6.6.10. - 104. Feeder roller of the small seed hopper
Fed quantities increase when the roller (1) is inserted into the feeder and decreases
when the roller is pulled out of the feeder.
Operation and maintenance manual
1.00 FX300 and FX400 Comfort
89 (189)