Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 74 / 189

2. Subtract a tramline by pressing the ADD TRAMLINE COUNTER button several times in a
row until the correct number of tramlines is set.
The number of tramlines will increase at rst and then start from 1 again.
6.3.3.2. Stopping the tramline counter
Figure. 6.3.3.2. - 81. Stopping the tramline counter
The tramline counter can be stopped when work is interrupted and when lling the
machine. The tramline counter can be stopped when the lift inhibit function is in its
normal mode (1/3). See section 6.3.1. Active operating mode.
1. Stop the tramline counter by pressing the STOP TRAMLINE COUNTER button (1)
6.3.4. Setting the fertiliser target rate
Adjusting of fertiliser target rate is optional.
Figure. 6.3.4. - 82. Setting the fertiliser target rate
The fertiliser target rate (1) is set on the SHFT screen.
1. Press the SET button (2).
The rst number starts to ash.
2. Change the value by pressing the up/down arrow buttons.
3. Con rm the value by pressing the right arrow button.
4. Repeat steps 2-3 for other numbers.
Operation and maintenance manual
FX300 and FX400 Comfort
1.00
74 (189)