2981
2982
2983
7.1.13. Checking the functioning of the fertiliser remote control
Figure. 7.1.13. - 129. Fertiliser remote control
1. Enable the fertiliser remote control and ensure that the dial (2) moves in the fertiliser
feeding quantity scale (1).
The adjustment only moves when the seed shaft rotates.
7.2. Lubrication
After the commissioning of the machine, all lubrication points should be lubricated
after the rst 10 hectares.
The disc coulters are equipped with bearings lubed for life and they do not need to be
lubricated.
When lubricating, make sure that the grease nipple is open. Lubricate the point until
grease ows out of the joint. Usually, 1-2 squeezes of a grease gun is enough for the
grease nipples. Wipe off excess grease.
Use lithium-based lubricating grease for lubrication. The chains are lubricated with
high-quality motor oil. Using viscous, high- bre grease is prohibited.
7.2.1. Quick instructions, lubrication
Table. 7.2.1. - 17. Lubrication points
Lubrication point
1) Every 50
hectares
2) Every 500
hectares or
once per
operating
season
Number of
lubricating
nipples in
the machine
(pcs)
X
X
X
2
7.2.4. COULTER WEIGHT CYLINDER
X
2
Operation and maintenance
manual
1.00
Cerex 300
112 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...