Multiva Cerex 300 Comfort, Operation And Maintenance Manual

Page: 166 / 187

Figure. 7.9.3.1. - 229. Removing the bearing and O-ring
2. Detach the O-ring (3) from the front of the bearing.
3. Remove the bearing (2) from the bearing housing (1).
Detach the bearing from the back of the bearing housing using a clamp.
7.9.3.2. Installing a bearing
Figure. 7.9.3.2. - 230. Installing a bearing
1. Clean the bearing housing (1).
2. Install the new bearing (2).
Install the bearing using a clamp.
3. Replace the O-ring (3).
Operation and maintenance manual
Cerex 300 and Cerex 400 Comfort
1.00
166 (187)