Multiva Cerex 300 Comfort, Operation And Maintenance Manual

Page: 126 / 187

Figure. 7.1.6. - 161. Wheel drive chain
2. Check the chain (1) de ection.
The maximum allowed chain de ection (A) is 10 mm. If needed, adjust the chain
tension in accordance with section 7.7.1. Tightening the wheel drive chain.
3. Reattach the housing cover and fasten the two bolts of the cover.
Always use new locknuts to install.
7.1.7. Inspecting the wheel drive clutch
The clutch should be inspected once per year / seeding season.
Figure. 7.1.7. - 162. Inspecting the clutch
1. Check the clearance of the exible coupling element of the clutch (1).
Check the clearance of the exible coupling element by measuring the distance
between the hub and the exible coupling element (2) by using a clearance
gauge.
If the clearance is 3 mm or more, replace the exible coupling element in
accordance with section 7.7.2. Replacing the wheel drive clutch.
Operation and maintenance manual
Cerex 300 and Cerex 400 Comfort
1.00
126 (187)