Chapter 2 – QuickCarrier USB GPRS (MT100UCC-G2)
22
QuickCarrier Developer’s Guide
Chapter 2 – QuickCarrier USB GPRS
(MT100UCC-G2)
The QuickCarrier USB GPRS is an embedded USB cellular modem that offers standards-based quad-band
GSM/GPRS Class 10 performance. These quick-to-market devices combine a network approved cellular
SocketModem and a USB carrier card in one compact design. With its 4-pin USB interface the QuickCarrier
USB embedded cellular modem cables to an existing device’s internal USB port and can be secured using
the four mounting holes located at the corners of the printed circuit board. Embedding M2M connectivity
into your Windows or Linux device has never been this quick or this easy.
Network Activation
Note the following:
●
These units ship without network activation.
●
To connect to the cellular network, you will need a cellular account. See the Cellular Activation
procedures.
Technical Specifications
The QuickCarrier USB MT100UCC-G2 and MT100UCC-G2-ED meet the following specifications:
Category
Description
Standards
GPRS Class 10
Frequency Bands
Quad-band GSM 850/900/1800/1900 MHz
Data Format
10 bit Serial Asynchronous
Data Error Correction
MNP2
Data Compression
V.42bis
Driver Support
For Windows XP (SP3), Server 2003/2008, Vista, 7, and Linux.
CDC-ACM compliant driver.
USB Interface
USB 2.0 Full Speed Compliant
Weight
1.536 oz. (43.5 g)
Dimensions
3.650" x 1.375" (92.71 mm x 34.925 mm)
Operating Temperature
-40° C to +85° C
Storage Temperature
-40 °C to +85°C
Humidity
20% to 90% RH, non-condensing
Operating Voltage
Supply Range: 4.75V to 5.25V
1.1A nominal current
Device may be damaged if voltage exceeds 5.5V
Input Power
USB bus powered
Antenna Connector
Surface mount UFL
SIM Holder
Standard 1.8V and 3V SIM holder
Supported IP Protocols
DNS Resolve, FTP Client, LCP, PPP (dial-out), TCP socket, UDP socket, PAP and
CHAP authentication
