Multitech MultiModem ISI ISI5634UPCI Series, Quick Start Manual, Page: 47 / 66

47
Chapter 3—Driver Installation - SCO Open Server 5
Note: Only one of the options (e.g., modem control or local
terminal access) should be enabled for any port at one time. For
example, you cannot enable
ttyl1a
and then enable
ttyl1A
.
To change the status of a port, disable the current status
(
disable ttyl1a
) and then enable it for the desired status
(
enable ttyl1A
).
Removing the Driver (SCO Open Server 5)
To remove the ISI Driver, enter the configuration utility (e.g., custom
for SCO Open Server 5) and follow instructions to remove the entire
driver and rebuild the kernel without the ISI driver. If it is necessary to
reinstall the driver due to I/O address or IRQ overlap, remove the
driver first.
Note: Remove the driver before permanently removing the ISI card
from the computer.
All manuals and user guides at all-guides.com