Multitech MultiModem ISI ISI5634UPCI Series, Quick Start Manual, Page: 40 / 66

40
ISI5634PCI/4/8 Quick Start Guide
SCO Open Server 5 Driver Installation
The ISI driver for SCO Open Server 5 is shipped on ISI Family CD-ROM
(FAT file system) and can also be downloaded from the Multi-Tech
web site. In both cases, the driver files are compressed (“tarred”).
Users installing from the CD-ROM should begin at “To install from
CD-ROM” directly below. Users installing from a floppy disk should
skip down to “To install driver from floppy disk” later in this section.
The filename of the SCO5 driver in its tarred form is sco50x.tar .
This present installation section is task-oriented with minimal
explanation of procedural steps. The section Multi-Tech Installation
Script, which immediately follows this section, presents additional
details to aid in installation.
To install from CD-ROM:
# mount -r /dev/cd0 /mnt
# cd /mnt
# cd servcard/drivers/sco50x
#cp sco50x.tar /
# cd
<ENTER>
To format a floppy disk for SCO5:
1. At the Unix prompt, run the scosh program.
2. Select Manager .
3. Select Archive .
4. Select Format .
5. Make sure that Device is pointed to the floppy drive.
6. Select
Continue .
To untar the driver file and copy files onto floppy disk:
1. Make a temporary directory for the ISI driver files..
# mkdir /isi
2. Copy the tarred isi driver file into the temporary directory.
All manuals and user guides at all-guides.com