Multitech MTSMC-MNG2, Device Manual

Page: 24 / 45

SIM CARD AND ACCOUNT ACTIVATION
24 SocketModem
®
Cell MTSMC-MNG2 Device Guide
Chapter 6 – SIM Card and Account Activation
SIM Card and Account Activation
To use the device, set up a wireless account with your network provider:
1. Contact your network provider to obtain an account and a SIM card for their network. This device
requires a micro mini SIM (3FF) (2FF).
2. Give the provider the following:
a. The device’s unique 15-character IMEI number located on the device label.
b. The device model number, also located on the device label. This number allows the carrier to verify
that the device is approved for operation on their network.
Important: Check your product’s label for the correct information to provide your wireless carrier.
Provide the model number (not the ordering part number) listed on the label.
3. Follow your provider's instructions for activating their SIM card on their network.
Account Activation for Cellular Devices
Some MultiTech devices are pre-configured to operate on a specific cellular network. To use the device, you must
set up a cellular data account with your service provider. Each service provider has its own process for adding
devices to their network.