MultiModemDSVD User Guide
12
14. At the file name prompt, if you have Microsoft Word 6.0 or later, type
register.doc
and press ENTER. If you do not have Microsoft Word, type
register.txt
and
press ENTER.
15. Press ENTER twice more.
16. To select the Zmodem transfer protocol, type
Z
and press ENTER.
17. The download begins automatically. As the file is downloaded, a dialog box re-
ports on the progress of the download. If the download fails, your baud rate
may be set too high. Log off, set the COM port baud rate lower, and call again.
18. To log off the BBS, press ENTER, type
G
for “good-bye,” and press ENTER
twice more.
Windows HyperTerminal
1. Click
Start
; then choose
Programs
,
Accessories
, and
HyperTerminal.
2. Start HyperTerminal by double-clicking on the Hypertrm icon. HyperTerminal
asks for the name of the connection.
3. Type
Multi-Tech BBS
in the
Name
box and click
OK
.
4. In North America, type
800
in the
Area code
box and
392-2432
in the
Phone
number
box. Local and international users, type
612
in the
Area code
box and
785-3702
in the
Phone number
box.
5. Verify that your modem is selected in the
Connect using
box, then click
OK
.
6. In the
Connect
dialog box, click
Dialing Properties
.
7. Make any necessary changes in the
Where I am
and the
How I dial from this
location
boxes. If you must dial
9
to access an outside line, you should type
9
in
both the local and the long distance boxes unless your phone system has a special
requirement.
8. Click
OK
, then click
Dial
. You will know you have reached a modem by the
harsh sounds of the modem handshake.
9. When the BBS welcome screen appears in the HyperTerminal window, type
your first name, last name, and password following the prompts. If you are a
first-time caller, the BBS asks if your name is spelled correctly. If you answer
Y
,
a questionnaire appears. You must complete the questionnaire to use the BBS on
your first call.
10. Press ENTER until the Main Menu appears. From the Main Menu you have access
to two areas: the Files Menu and News. For help with menu commands, type
?
.
11. In the Main Menu, type
F
and press ENTER to access the Files Menu, then type
D
and press ENTER to download.
12. At the prompt, if you have Microsoft Word 6.0 or later, type
register.doc
and
press ENTER twice. If you do not have Microsoft Word, type
register.txt
and
press ENTER twice.
13. Type
Z
and press ENTER to select the Zmodem transfer protocol.
Summary of Contents for MT5600DSVD2
