Multitech CC1600 Series, Owner'S Manual

Page: 49 / 76

49
Chapter 4 - Modem Commands, S-Registers & Result Codes
4.3 Result Codes
The MT2834BLR Command mode provides you with several responses, or “Result Codes”, that can
aid you in Command mode operation. These Result Codes are displayed on your video monitor.
AT&Q0 selects Multi-Tech responses with Reliable/Compression modifiers. The terse result code
for CONNECT 2400 is 9.
AT&Q1 selects Standard AT command set responses. The terse result code for CONNECT 2400 is
10.
The following tables list result codes generated by the &Q command.
Table 4-2. &Q0 "Multi-Tech" Result Codes
TERSE VERBOSE
0 OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
5 * CONNECT 1200
6 NO DIALTONE
7 BUSY
8 NO ANSWER
9 * CONNECT 2400
11 * CONNECT 4800
12 * CONNECT 9600
13 * CONNECT 14400
19 * CONNECT 19200
21 * CONNECT 21600
24 * CONNECT 24000
26 * CONNECT 26400
28 * CONNECT 28800
31 * CONNECT 31200
33 * CONNECT 33600
* With MNP error correction on, RELIABLE (or R) is added to these result codes. With LAP-M error
correction on, LAP-M (or L) is added to these result codes. With data compression on,
COMPRESSED (or C) is added. (Note these "Extended" Result Codes are displayed when your