Multitech CC1600 Series, Owner'S Manual

Page: 46 / 76

46
MT2834BLR Owner’s Manual
S4
Line Feed Character
Unit: ASCII Character
Range: 0-127
Default: 10
Description: Defines the character recognized as LINE FEED.
S5
Backspace Character
Unit: ASCII Character
Range: 0-127
Default: 8
Description: Defines the character recognized as BACKSPACE.
S6
Wait Time for Dial Tone
Unit: 1 second
Range: 2-255, 4-255*
Default: 2, 4*
Description: Sets the time the modem waits after the RETURN key is pressed before
executing a dial command.
S7
Time for Carrier (Abort Timer)
Unit: 1 second
Range: 1-255, 1-45**
Default: 45
Description: Defines the Abort Timer (lack of carrier) delay time.
S8
Pause Time for Comma
Unit: 1 second
Range: 0-255, 4-255**
Default: 2, 4**
Description: Sets the length of the pause caused by a comma inserted in a dialing
command.
S9
Carrier Detect Response Time
Unit: 100 mSec.
Range: 1-255
Default: 6
Description: Sets the time delay for when the modem first detects a valid incoming carrier
signal and when the modem turns on its Carrier Detect circuit.
S10
Carrier Loss Disconnect Delay Time
Unit: 100 mSec.
Range: 0-255
Default: 7
Description: Sets the time a carrier signal must be lost before the modem disconnects.
S11
Tone Dialing: Tone Spacing and Duration
Unit: 1 mSec.
Range: 1-255, 80-255*
Default: 70, 80*
Description: Sets the time duration of spacing between tone in tone-dialing.
*Value for International Units
** Value for International and DOC units