SPECIFICATIONS AND HARDWARE INFORMATION
10
Conduit
®
AP MTCAP2-LNA3-915-042x-POE and MTCAP2-915-042x-POE User Guide
Resetting the Device
You need:
A pin, paperclip, or similar thin object that can fit into the reset hole
To reset the device:
1.
Find the hole labeled RESET. The reset button is recessed into the case.
2.
Use the pin to press and release the RESET button as follows:
Reset options:
To reboot, press RESET for less than 3 seconds.
To reboot and restore user-defined defaults (if previously set), press RESET for 3 to 29
seconds.
To reboot, restore factory settings, and erase user-defined defaults, press RESET for 30
seconds or longer.
The device restarts in commissioning mode. The system automatically removes all user
accounts.
Enter a new username and password to create your new administrative account. (Refer to
User Accounts
in the appropriate software guide for details on username and password
requirements.)
Note:
The device reboots when restoring settings.
For more information about commissioning mode, consult the mPower Software Guide or mlinux developer resources.
Refer to
Documentation Overview
for details.
Power Measurements
MTCAP2-915-042
Note:
Multi-Tech Systems, Inc. recommends that you incorporate a 10% buffer into the power source
when determining product load.
Maximum Power:
The continuous current during maximum data rate and at LoRa Max power setting
Tx Pulse:
The average peak current during LoRa transmission.
Inrush Charge:
The total inrush charge at power on.
Voltage
Sleep Mode
Current
Cellular Call
Box
Connection
No Data, OR
IDLE Measure,
with no Radio
Average
Measured
Current at
Maximum
Power
TX Pulse Peak
Current for no
radio model
Total Inrush
Charge
Total Inrush
Charge
Duration
5 VDC
N/A
137 mA
452 mA
584 mA
0.962 mC
1.69 mS
38 VDC POE
N/A
61 mA
126 mA
272 mA
0.127 mC
10.6 mS
56 VDC
N/A
40 mA
106 mA
224 mA
0.130 mC
10.3 mS
Summary of Contents for 92507603LF
Page 1: ...Conduit AP MTCAP2 LNA3 915 042x POE and MTCAP2 915 042x POE User Guide ...
Page 22: ...MOUNTING THE DEVICE 22 Conduit AP MTCAP2 LNA3 915 042x POE and MTCAP2 915 042x POE User Guide ...
Page 23: ...MOUNTING THE DEVICE Conduit AP MTCAP2 LNA3 915 042x POE and MTCAP2 915 042x POE User Guide 23 ...
