POWER ON
.
.
. .
.
.
. .
All digit segment will be turned ON for 3 sec
Previous or default sensor input will be display for 2 sec
Process Value
UTC-122,222
UTC-422
Set Value
POWER ON
1) Press Key to enter in to an instrument.
2) Press Key to go to next parameter.
4) Press Key to save change in setting
5) To start or stop Auto-Tunning press key for 6 sec.
6) Press Or key for 3 sec to go to factory setting mode.
3) Use Or key to change value of parameter.
J: 0 to 600°C / K: 0 to 1200°C /
PT-100: -99 to 400ºC /PT.1: -99.0 to 400.0°C
PID / ON-OFF (selectable)
Output 1
Output 2
Power Supply
100 to 250V AC, 50 / 60 Hz smps
Model
Display
Size
Panel Cutout
Input
Temperature
Range
Control Action
UTC-122
96 X 96 X 50
92 X 92
68 X 68
44 X 44
72 X 72 X 85
48 X 48 X 95
UPPER:- 4 Digit 7 seg 0.56”,red LED Display
UPPER:- 4 Digit 7 seg 0.39”,red LED Display
LOWER:- 4 Digit 7 seg 0.4”,green LED Display
LOWER:- 4 Digit 7 seg 0.28”,green LED Display
UTC-222
UTC-422
J, K, PT-100 (selectable)
1st Output : Relay Or SSR,12V DC,30mA
2nd Output: Relay
OPERATING MANUAL
UNIVERSAL TEMPERATURE CONTROLLER
www.multispanindia.com
Page - 1
UTC 122
UTC 222
UTC-122,222 & 422
UTC 422
Technical Specification
Key Operations
UTC 122
UTC 222
UTC 422
