MultiSound BIRDSTOP BS-15, User Manual

Page: 44 / 136

44
3. Press the SET button. Input the value
I
to enable the internal speaker
only. Input the value
E
to enable the external speaker only. Input the
value
EI
to enable both speakers. Press the “-/+” buttons to set the
desired value.
Value
I
enables only the internal speaker
Value
E
enables only the external speaker.
Value
EI
enables both speakers.
4. Press the SET button to confirm.
5. To exit the menu, press the SEL button repeatedly until the
EH
(exit)
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.
DL
- Display ADJ
Use this setting to change the display light brightness from a minimum
level of 1 to a maximum level of 9.
1. With the display on, press the SEL+SET keys simultaneously for at
least 2 seconds, to enter the SETUP MENU. If the device is in power
saving mode, press any key to turn on the display.
2. Press the SEL button repeatedly until the
dL
symbol appears on the
display.
3. Press theSET button. Press the “-/+” buttons to set the value from
01
(minimum level) to
09
(maximum level).
4. Press the SET button to confirm.
5. To exit the menu, press the SEL button repeatedly until the
EH
(exit)
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.