MultiSound BIRDSTOP BS-15, User Manual

Page: 40 / 136

40
5. Press the SET button to confirm.
6. To exit the menu, press the SEL button repeatedly until the
EH
(exit)
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.
rd
- Random
The random function, when activated, is used to randomly vary the
operating and pause time set for the call selected by the user. Individual
values for
tF
and
tP
vary by a maximum of 50%. For example, if the
value
tF
is set to 30 seconds, the time of the call cannot be less than
15 seconds, the 50% variation, but it could be for a period of 20 or 25
seconds. In this way, by altering both operation time and pause time,
you achieve combinations that do not allow the pest to get used to the
alarms.
1. With the display on, press the SEL+SET keys simultaneously for at
least 2 seconds, to enter the SETUP MENU. If the device is in power
saving mode, press any key to turn on the display.
2. Press the SEL button repeatedly until the
rd
symbol appears on the
display.
3. Press the SET button. Press the “+” button to set the value of “1” to
enable the random function. Press the “-” button to set the value of
“0” to disable the random function.
4. Press the SET button to confirm.
5. To exit the menu, press the SEL button repeatedly until the
EH
(exit)
symbol appears on the display. Press the SET button to confirm or
wait until the repeller returns automatically to the track that was
playing after 10 seconds.