Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
27
4.2.2.
Network
1
2
3
4
5
6
7
Figure 24: Network section on the Configuration page
The Network section is divided into two subsections – Interfaces and Bridging. In most situations only
the former is configured while the latter is left in its default (disabled) state. See the description of the
interfaces’ related setting in the table below:
LAN 1
LAN 2
Parameter
Description
1
3
IP Address
IPv4 address for the interface in the xxx.xxx.xxx.xxx format
(e.g. 192.168.1.44). Addresses set on LAN 1 and LAN 2
should be different.
Prohibited ranges:
127.xxx.xxx.xxx
0.xxx.xxx.xxx
224.xxx.xxx.xxx
2
4
Subnet mask
IPv4 netmask for the interface in the xxx.xxx.xxx.xxx
format (e.g. 255.255.255.0).
Prohibited values:
0.0.0.0
255.255.255.255
Table 13: Description of the parameters in the Interfaces subsection of the Network section on the
Configuration page