MULTISOFT DGR-1000, User Manual, Page: 19 / 83

Video Grabber DGR-1000 User Manual - v. 1.4 (FW 1.9)
19
4.1.4.1. Signal
1
2 3
4
Figure 17: Signal subsection in the Video section on the Status page
Signal subsection groups parameters that relate to the signal captured by Video Grabber. See the
description of the available parameters in the table below:
ID Parameter Description
1
Monitor
emulation Status of monitor emulation:
- Enabled – monitor emulation is enabled
- Disabled – monitor emulation is disabled
2
Status Status of the DisplayPort signal:
- Not Locked – no signal detected
- Locked – signal detected and locked
3
EDID EDID used by the Monitor emulation:
- Default – default EDID in use
- Custom – custom EDID (loaded by the user) in use
4
Resolution Resolution of the captured signal:
- Resolution (width x height @ refresh rate) – shows detected
and locked resolution along with the refresh rate
- N / A – no signal is locked and captured
Table 6: Descriptions of parameters available in the Signal subsection of the Video Section on the Status page