MultiScreen In House TV Communication System, Operator'S Manual

Page: 52 / 234

MultiScree
52
Adding a Scroller to a Screen
A scrolling text message may be placed on any screen. Known as a
scroller , this
will appear as a single line of text moving along from the right side of the screen
towards the left. The text in a scroller may either be manually typed in, or else it
can automatically come from an internet news feed. To add a scroller to a screen,
follow these steps:
[a] In the Sequence Editor , first double-click the screen you wish to add the
scroller to. Next, click on Add under the header Scroller . This will bring up
the Scroller Editor, pictured below.
[b] If you want to manually type in the scroller‟s text then click the text entry
box in the top right part of the screen & use the keyboard to enter the text
you wish to appear on the scroller. Otherwise if you want the scroller‟s text
to automatically come from an internet news feed then perform the steps in
the following section
Adding a News Feed to a Scroller
on
page 55
,
then continue on here from step [c] .