MultiScree
∂
Channel
Removing an Element from a Standard Screen
When an element is no longer needed, it can be permanently removed or deleted
from a screen. Once removed, some elements such as text cannot be recovered,
so make sure you really don't need the element any more before removing it.
To remove a
Graphic
, click the button labelled
Remove
under the
Graphic
header. Once removed, a graphic can be added again by reselecting it from the
Graphic Library. Removing a graphic from a screen does not delete it from the
Graphic Library.
Text
can be removed by clicking
Remove Text
. Removing text deletes all text
from the screen; if you need the text at a later date, you will have to re-type it all
by hand.
A
Clock
can be removed by clicking
Remove Clock
. Once removed, all settings
for the clock will be forgotten. If you add a clock at a later date, it will revert to
the default settings.
A
Scroller
can be removed by clicking the
Remove
button located under the
Scroller
section at the right hand side of the screen. Once removed, all settings
for the scroller are forgotten; if you need to use it again, you will have to re-type
it by hand. To
Hide
the scroller instead, see
a Screen.
A
Sound
can be removed by clicking the
Remove
button at the bottom right
corner of the screen. Once removed, a sound can be added again by using the
Sound Selector. Removing a sound from a screen does not delete it from the
Sound Library. If you wish to remove a sound temporarily, you can
Mute
it
instead. A muted sound will not play until the volume is again increased. See
page 57, Changing an Element on a Standard Screen
.
58