PAGE 32 —EPOXY SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV. #5 (10/06/10)
Trowel Arm Adjustment Tool
If blades show uneven wear patterns or some tend to wear out
faster than others, the trowel arms may need to be adjusted.
Whiteman makes a special tool (Figure 38) that will adjust all of
the trowel arms consistently. The Trowel Arm Fixture P/N is 1817.
Grinding Attachments
Available grinding attachments are used for grinding surface
imperfections or joints. These attachments allow greater utilization
of your trowel. Figure 36 illustrates a typical grinding disk assembly,
complete with hub and stone mounting plate.
Figure 38. Trowel Arm Adjustment Fixture
EPOXY/M SERIES TROWEL — OPTIONS
Lifting Bale
There is a heavy duty, center balance type lifting bale (Figure 37)
made specifically for your trowel. These bales are ideal for lifting
and transporting your trowel. They are designed to lift the finisher
and balance it on it’s center of gravity, providing great stability
while lifting. This option is not available on electric trowel models.
Figure 37. Lifting Bale
Figure 36. Grinding Disk
Summary of Contents for WHITEMAN EPOXY/M Series
Page 13: ...EPOXY M SERIES WALK BEHIND TROWEL OPERATION AND PARTS MANUAL REV 5 10 06 10 PAGE 13 NOTES...
Page 102: ...PAGE 102 EPOXY SERIES WALK BEHIND TROWEL OPERATION AND PARTS MANUAL REV 5 10 06 10 NOTE PAGE...
Page 105: ...EPOXY M SERIES WALK BEHIND TROWEL OPERATION AND PARTS MANUAL REV 5 10 06 10 PAGE 105 NOTE PAGE...
