background image

PAGE 8 — MVC-77 SERIES PLATE COMPACTOR — PARTS & OPERATION MANUAL — REV. #2 (09/07/04)

l

MVC-77 SERIES — RULES FOR SAFE OPERATION

CAUTION:

Failure to follow instructions in this manual
may lead to serious injury or even death!

This equipment is to be operated by trained
and qualified personnel only! This

equipment is for industrial use only.

The following safety guidelines should always be used when
operating the MVC-77 Series Plate Compactor:

GENERAL SAFETY

DO NOT 

operate or service this equipment before

reading this entire manual.

This equipment should not be operated by persons under 18
years of age.

NEVER

 operate this equipment without proper

protective clothing, shatterproof glasses, steel-toed
boots and other protective devices required by the
job.

NEVER

 operate this equipment when not feeling

well due to fatigue,  illness or  taking medicine.

NEVER

 operate this equipment under the

influence or drugs or alcohol.

NEVER

 use accessories or attachments,

which are not recommended by Multiquip for this equipment.
Damage to the equipment and/or injury to user may result.

ALWAYS

 refuel in a well-ventilated area, away from sparks

and open flames.

ALWAYS

 use extreme caution when working with 

flammable

liquids. When refueling, 

stop the 

engine and allow it to cool.

DO NOT

 smoke around or near the machine. Fire or explosion

could result from fuel vapors, or if fuel is spilled on a hot
engine.

NEVER

 operate the compactor in an

explosive atmosphere or near combustible
materials. An explosion or fire could result
causing severe 

bodily harm or even death.

Topping-off to filler port is dangerous, as it
tends to spill fuel.

NEVER

 touch the hot exhaust

manifold, muffler or cylinder. Allow
these parts to cool before servicing
engine or compactor.

The engine section of this compactor requires an adequate
free flow of cooling air.  Never operate the compactor in any

enclosed or narrow area
where free flow of the air is
restricted. If the air flow is
restricted it will cause
serious damage to the
compactor or engine and
may cause injury to people.
Remember the compactor's
engine gives off DEADLY
carbon monoxide gas.

High Temperatures

 – Allow the engine to cool before adding

fuel or performing service and maintenance functions. Contact
with 

hot components can cause serious burns.

Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.

ALWAYS

 check the machine for loosened  threads or bolts

before starting.

Manufacture does not assume responsibility for any accident
due to equipment modifications.

 

ALWAYS

 wear proper respiratory (mask),

hearing and eye protection equipment
when operating the rammer.

Summary of Contents for Mikasa MVC-77 Series









































































Reviews: