PAGE 22 — MC94SK/PK CONCRETE MIXER • OPERATION MANUAL — REV. #0 (06/22/22)
OPERATION
MIXING
1. To position the tub, make sure the mixer is placed
on firm level ground, then pull up on the dump latch
(Figure 20) and turn the hand wheel until the tub is
at the desired position. Once the tub is at the desired
position, pull down on the dump latch to lock the tub
in position.
Figure 20. Mixing Drum Positioning
2. As the drum rotates, use a shovel (Figure 21) to place
the cement mix inside the drum, add water as required.
Be careful to only place the tip of the shovel inside
the drum.
CAUTION
NEVER
stand in front or behind the mixing drum while
it is being placed in the dump position. Stay clear of the
mixing drum while it is being positioned.
Figure 21. Filling Mixing Drum (CORRECT)
3.
Placing the shovel all the way inside the drum (Figure 22)
will cause the shovel to strike the blades. This condition
will make the shovel rotate, and could cause injury to
personnel.
NEVER
place hands inside the mixing drum
while it is rotating.
Figure 22. Filling Mixing Drum (WRONG)
Discount-Equipment.com
