Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
53
/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
8.4.7
Jump start
If the machine battery (FIG. 32 - Rif. 1) is disabled it is possible to start the engine using an booster battery and the booster cables
(FIG. 32 - Rif. 2) or a booster.
WARNING
IT IS COMPULSORY TO WEAR GLASSES AND PROTECTIVE GLOVES.
IT IS COMPULSORY TO CHECK IF THE BATTERY AND THE CABLES ARE DAMAGED.
IT IS COMPULSORY THAT THE BOOSTER BATTERY HAS THE SAME VOLTAGE AND AMPERAGE OF THE MACHINE BATTERY.
DANGER
IT IS FORBIDDEN TO MAKE A JUMP START WHILE SMOKING AND/OR IN PROXIMITY OF FLAMES. DANGER OF FIRE AND/OR
EXPLOSION.
Proceed as follows:
1) Put the machine in “safety state” (see par. 9.2).
2) Open the engine cover (see par. 9.4).
3) Connect positive (+) booster cable to disabled machine battery po) post (FIG. 32 - Rif. 3). You can also connect it to the
positive post of the starter motor (FIG. 37 - Rif. 4).
4) Connect other end of po) booster cable to booster battery po) post (FIG. 32 - Rif. 4).
5) Connect negative (-) booster cable to booster battery negative (-) post (FIG. 32 - Rif. 5).
6) Connect other end of negative (-) booster cable to a metal part of machine frame or engine, away from battery
(FIG. 32 - Rif. 6).
7) Make sure the cables do not interfere with mobile parts of the engine.
8) Switch on the engine and run machine for several minutes (see par. 8.3.2).
9) Once the engine is running disconnect the cables in the reverse order, negative cable first.
10) Close the engine cover.
WARNING
WHEN YOU PROCEED TO DISCONNECT THE BOOSTER CABLES PAY ATTENTION TO THE MOVING PARTS OF THE ENGINE (FAN,
BELTS, ETC ...).
FIG. 32
3
5
6
1
2
4
OPERATION -8
Summary of Contents for 6 Series
Page 2: ......
