MultiOne 6 Series Page 15 Instruction Manual Download

Page: 15 / 80

Instruction manual (Translation of the original instructions)

CM150032EN - 16.06.15 - 05 (11.07.18)

/76

Self-moving Compact wheel loader, articulated frame, equipped with

multipurpose quick coupler, MULTIONE 6 Series

MultiOne SRL

Ref.

Part

Function

Footrest step

It allows to get on the machine safely.

Pedals

They allow to determine the direction and speed.

Wheel

It allows to change direction during the translation of the machine.

ROPS

It protects the operator in charge in case of rolling over of the machine.

Roof and FOPS structure

It protects the operator in charge from bad weather and from the direct exposure to the

sunbeams, the FOPS structure protects the operator in charge against the object fall.

Document compartment

It contains the operating manual.

Rear reflectors

They make more visible the car.

Opening engine space compartment

It protects the engine and prevents the operators in charge to get in touch accidentally

with the mobile parts and high parts.

Fuel tank cap

It allows refuelling.

Engine

It moves the hydraulic pumps.

Coupling for towing hook or

counterweight (option)

It allows to connect to the machine a coupler for light trailers or to install some

counterweight to increase the stability of the machine.

Central steering joint

Actuated by a hydraulic cylinder allows the steering of the machine.

Wheels

They support and allow the machine movement.

Disconnecting battery key

It allows to disconnect the battery.

Working lights

They provide more visibility in a situation of poor lighting.

Control panel

It assembles operating controls of the machine and of the possible attachment assembled

to the machine.

Driving seat supplied with armrests and

safety belt

It is for the operator in charge to be seated and fastened to the machine.

Hydraulic circuit pipes

They allow the passage of the hydraulic oil for assembled equipping working.

Lifting arm

It raises possible attachment assembled of the machine.

Multi - connector

It allows the connection to the attachment hydraulic circuit.

12 V DC power outlet

It provides power to any electrical devices on the assembled attachment.

Quick coupler

It allows the mechanic connection to attachment.

TAB. 2

DESCRIPTION OF THE MACHINE -4

Summary of Contents for 6 Series
















































































Search results

Summary of Contents for 6 Series

Reviews:

Related manuals for 6 Series

Brands by name

Popular brands

MultiOne 6 Series, Instruction Manual

Search results

Summary of Contents for 6 Series

Reviews:

Related manuals for 6 Series

Brands by name

Popular brands