MultiOne 6 Series Instruction Manual Download Page 14

Page: 14 / 80

MultiOne SRL

Self-moving Compact wheel loader, articulated frame, equipped with

multipurpose quick coupler, MULTIONE 6 Series

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)

/76

DESCRIPTION OF THE MACHINE

The machine has been planned and carried out to operate according to the type of attachment assembled in agricultural environment,

green spaces, farming and gardening, building and road yards both in the private sector and in the public one.

The machine is provided with a heat diesel engine, that sets a series of hydraulic pumps.

These feed an hydraulic circuit at high pressure that enables:

1) The four wheels whose the machine is equipped (each is moved by an hydraulic engine).

2) The steering system, formed by a hydraulic cylinder which acts on the articulation of the central pivot steering of the frame.

3) A lifting arm (in the front part of the machine).

4) The attachment assembled in case on the machine.

The control panel is placed on the driving seat.

4.1

Main parts and their functions

FIG. 1

214

215

216

217

4- DESCRIPTION OF THE MACHINE

Summary of Contents for 6 Series
















































































Search results

Summary of Contents for 6 Series

Reviews:

MultiOne 6 Series, Instruction Manual, Page: 14 / 80

Search results

Summary of Contents for 6 Series

Reviews: