User Manual
5
Introduction to the Structure of the Oscilloscope
This chapter makes a simple description of the operation and function of the front panel of
the oscilloscope, enabling you to be familiar with the use of the oscilloscope in the
shortest time.
Front Panel
The front panel has rotary controls and function buttons. The 5 buttons in the column on
the right side of the display screen or in the row under the display screen are menu
selection buttons, through which, you can set the different options for the current menu.
The other buttons are function buttons, through which, you can enter different function
menus or obtain a specific function application directly.
8
2
5
3
7
4
6
1
Figure 3-1 Front panel
1.
Display area
2.
Control (button and rotary control) area
3.
Probe Compensation: Measurement signal (5V/1kHz) output.
4.
EXT Trigger Input
5.
Signal Input Channel
6.
Copy button: You can save the waveform by just pressing this button in any user
interface.
7.
USB Host port:
It is used to transfer data when external USB equipment connects to
the oscilloscope regarded as "host device".
For example: Saving the waveform to USB
flash disk needs to use this port.