6-Using the Oscilloscope
17
14.
OPTION operation prompt: There are different prompts for different OPTION operations.
15.
Waveform display area, and the wave shows red.
6.4 Menu Description
The following example shows how to use the tool's menus to select a function, as shown in the
following figure.
1.
Press the
MENU
key to display the Function Menu on the right of the screen and the
corresponding optional settings on the bottom. Press
MENU
again will hide the Function
Menu.
2.
Press the
MENU
▲
or
MENU
▼
key to select different function menus.
3.
Choose one key from
F1
to
F5
and press it to change function setting.
See the following figure 6:
Figure 6: the Tool's Menus
6.5 Manually Setting the Vertical System, Horizontal System
and Trigger Position
6.5.1
Setting the Vertical System
To set the vertical position of channel:
(1)
The key
▲ (
red)
and
▼
(red)
can be used to adjust the vertical position of channel; the
relevant information will be displayed at the left bottom of the screen.
(2)
The key
(red)
and
(red)
can be used to adjust the voltage scale of channel; the
relevant information will be displayed at the left bottom of the screen.
Note:
Press
VERTICAL ZERO
(red)
key to set the vertical position of channel to zero.