MI
44
Innovation. Quality. Performance. Best in Industry. Worldwide.
Auto Step Size
The Auto Step Size function sets the automatic distance used during the 2D digitizing. The step size can be
adjusted per the part being scanned. If the 2D detail is complicated or the part is small, then operators are
encouraged to use a smaller step size (e.g., 0.050” [1.27mm]). If the 2D detail is simple or the part is large, then
operators are encouraged to use a larger step size (e.g., 1.0” [25.4mm]).
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until Digitize is highlighted in blue.
3. Press
Enter
to access the Digitize sub-menu.
4. Press
X-axis Jog Arrows
until Auto Step Size is highlighted in blue.
5. Press
Enter
to access the automatic step size function.
6. Enter the value for the step size (e.g., 0.25).
7. Press
Enter
to save the Step Size and return to the Digitize sub-menu.
Routers * Lasers * Plasma * Water Jets * Knife Cutters
www.MultiCam.com v. 03 13