manualshive.com logo in svg

Multicam Plasma 1000 V Series, User Manual, Page: 109 / 227

Share
Download
Multicam Plasma 1000 V Series User Manual Download Page 109

 

MI 

 

43

 

Innovation. Quality. Performance. Best in Industry. Worldwide.

 

 

Auto Scan Rate 

The Auto Scan Rate function sets the automatic rate for the scanning process during the 2D digitizing. The system 
defaults to 5” per second, but the normal recommended scan rate is 1” per second. Slower scan rates will be more 
accurate but will take longer to complete whereas faster scan rates will be less accurate but will take less time to 
complete. Operators will need to rely on the material, the complexity of the object, and experience to find the best 
time. 

1. Press 

Menu 

 to access the menu system. 

 

2. Press 

X-axis Jog Arrows 

 until Digitize is highlighted in blue. 

 

3. Press 

Enter 

 

to access the Digitize sub-menu. 

4. Press 

X-axis Jog Arrows 

 until Auto Scan Rate is highlighted in blue. 

 

5. Press 

Enter 

 to access the automatic scan rate function. 

    

 

 
6. Enter the value for the scan rate (e.g., 1.5). 

    

 

 

7. Press 

Enter 

 to save the Scan Rate and return to the Digitize sub-menu. 

 

 

 

 

 

 

 

 

 

 

Digitize

  

Menu

 

 

 

 

 

Routers * Lasers * Plasma * Water Jets * Knife Cutters  

                                                                                                                        www.MultiCam.com                        v. 03 13

 

Summary of Contents for Plasma 1000 V Series




































































































































































































































Reviews:

No comments