KF
23
Innovation. Quality. Performance. Best in Industry. Worldwide.
Gas Pressure Test
The Gas Pressure Test function allows the operator to test the pierce gas pressure and the cut gas pressure on laser
machines.
1. Press
Shift
and
Gas Pressure Test
to begin gas pressure testing.
The double arrows show the current setting of the gas pressure test.
2. Press
One
to test the pierce gas or
Two
to test the cut gas.
3. Press
Zero
to turn off the pierce gas or cut gas test.
4. Press
Cancel
to cancel the gas pressure test and return to the main display.
Park Y High or Low
The Park Y function will move the head assembly the maximum length of the gantry to the right or left in Y-axis.
This allows the operator to examine the work without interference from the head assembly.
1. Press
Shift
and
Y-axis Left Jog Arrow
to move the head assembly to the left side of the gantry.
2. Press
Shift
and
Y-axis Right Jog Arrow
to move the head assembly to the right side of the gantry.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
