KF
20
Innovation. Quality. Performance. Best in Industry. Worldwide.
Park Z Up or Down
The Park Z function will move the head assembly to either the absolute Z=0 position or all the way up in a
process which allows for tool changes.
1. Press
Shift
and
Z-axis Up Jog Arrow
to raise the head assembly to the absolute Z=0 position.
2. Press
Shift
and
Z-axis Down Jog Arrow
to lower the head assembly to the Lift Height position.
Change Material Thickness
The Change Material Thickness function allows the operator to change the programmed material thickness.
1. Press
Shift
and
Set Surface
to access the Change Material Thickness function.
2. Enter the thickness of the material using the number keypad (e.g., 0.200).
3. Press
Enter
to accept the material thickness and return to the main display.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
