MI
22
Innovation. Quality. Performance. Best in Industry. Worldwide.
Laser Frequency
The Laser Frequency function is used to adjust the quality of the cut in conjunction with Kerf Overlap. A higher
frequency creates more heat since the laser is on more often; therefore, materials which are more susceptible to
heat damage should be cut at lower frequencies. The overall frequency range is determined by the laser model.
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until Params_2D is highlighted in blue.
3. Press
Enter
to access the Params_2D sub-menu.
4. Press
X-axis Jog Arrows
until Laser Freq is highlighted in blue.
5. Press
Enter
to adjust the laser frequency.
6. Enter the laser frequency using the number keypad (e.g., 20000).
7. Press
Enter
to record the Laser Frequency and return to the Params_2D sub-menu.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
