MI
18
Innovation. Quality. Performance. Best in Industry. Worldwide.
Contrast
The Contrast function is used to adjust the contrast of the image when images are being rastered. The system
automatically defaults to 50, but the operator may change this value.
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until Params_2D is highlighted in blue.
3. Press
Enter
to access the Params_2D sub-menu.
4. Press
X-axis Jog Arrows
until Contrast is highlighted in blue.
5. Press
Enter
to change the contrast value. The cursor will be over the entry for the current contrast.
6. Enter the desired contrast using the number keypad (e.g., 50).
7. Press
Enter
to record the Contrast and return to the Params_2D sub-menu.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
