Multi-Tech RouteFinder RF802EW, User Manual

Page: 52 / 141

Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Chapter 5 - Telnet
52
Modem Initial string
Refer to your modem or ISDN TA User Guide for information.
Modem Dialup string
Refer to your modem or ISDN TA User Guide for information.
Modem Hangup string
Refer to your modem or ISDN TA User Guide for information.
Edit login script
Select this option to edit the login script executed when the client connects to the network.
Refer to the RouteFinder Manager chapter of this User Guide for additional information about
creating and editing scripts.
RADIUS Server
Select Enable to configure remote users to authenticate on a RADIUS Server.
RADIUS Access Server IP
Enter the IP address of the RADIUS Access server.
RADIUS Accounting Server IP
Enter the IP address of the RADIUS Accounting server. In most configurations, the Access
and Accounting server are located on the same machine, so the IP address is the same for
both.
RADIUS Secret
Enter the secret code or password for the RADIUS Server.
h.) Wireless Settings
Enter an ESSID, select a channel, and set encryption keys on this screen.
ESSID
Type a name that you would like to identify your secure shell. All wireless work stations must
have the same ESSID.
Channel
Select a channel. You may have to try more than one to achieve the best reception.
Enable/Disable
Choose to enable or disable WEP encryption.
WEP Keys
If you enable WEP encryption, you enter 64-bit encryption keys and 128-bit encryption keys.
Valid entries can use digits 0-9 and letters A-F. An encryption key composed entirely of zeros
is not valid.
Note: The keys have to match at both locations.
i). Router DNS IP Address
Enter the IP address of your Internet Service Provider’s DNS server.
j). DHCP Server
You may select Disable or Enable . If you would like the RF802EW DHCP server function to
provide IP information to workstations as they connect to the network, select Enable.
When you enable DHCP, you will be prompted to provide the beginning and ending IP
addresses in the range of addresses administered by your RouteFinder. Refer to the LAN
DHCP section of the RouteFinder Manager chapter of this User Guide for additional
information.
k). Virtual Server
Select Disable or Enable . If you select Enable, you may enter the external and internal IP
Addresses necessary to allow remote clients to access specific devices on your network via
the Internet. Refer to the General Settings section of the RouteManager chapter in this
User Guide for more information about Enabling IP Mapping.