Multi-Tech RouteFinder RF802EW, User Manual

Page: 107 / 141

107
Chapter 8 - LAN Client Settings
Multi-Tech Systems, Inc. RouteFinder RF802EW User G
uide
Accessing a Windows NT Server and a Novell NetWare Server
Note: Before configuring your remote site, ensure TCP/IP has been installed on your NT
Server.
Perform the following procedures if your PC workstation needs to access both a Windows NT Server
and a Novel NetWare Server.
Adding the dial-up adapter (Novell/NT Server Connection)
Windows 95/98/NT:
1. Click Start | Settings | Control Panel .
2. Double-click the Network icon to open the Network dialog box.
3. Click Add . The Select Network Component Type dialog box opens.
4. Select Adapter , then click Add . The Select Network adapters dialog box opens.
5. (Win95/98 only) In the Manufacturers list, select Microsoft . In the Network
Adapters list select Dial-up adapter .
Note: In Windows NT workstation there is no Manufacturers list.
6. Click OK twice to return to, and then close, the Network dialog box.
Adding TCP/IP (Novell/NT Server Connection)
Windows 95/98/NT:
1. In the Network dialog box, Configuration tab, click Add .
2. Select Protocol and click Add .
3. The Select Network Protocol dialog box is displayed. In the Manufacturers list
[Win95 only], select Microsoft . In the Network Protocols list, select TCP/IP
[Win95/98] or TCP/IP Protocol [WinNT only].
Note: Windows NT workstation has no Manufacturers list.
4. Click OK twice to return to, and then close, the Network dialog box.
Adding Client for Microsoft Networks (Novell/NT Server Connection)
Windows 95/98:
1. In the Network dialog box, Configuration tab, click Add .
2. Select Network Client and click Add .
3. The Select Network Client dialog box displays. In the Manufacturer’s list, select
Microsoft . In the Network Clients list, select Client for Microsoft Networks .
4. Click OK to add this Client and return to the Network dialog box.