INSTALLING THE DEVICE
12
MultiConnect
®
microCell MTCM2-L4G1 User Guide
Chapter 3 – Installing the Device
Installing a SIM Card
This model requires a SIM card, which is supplied by your service provider. To install the SIM card:
1.
Locate the SIM card slot on the side of the modem. The slot is labeled SIM.
2.
Slide the SIM card into the SIM card slot with the contact side facing up as shown. When the SIM card is
installed, it locks into place.
Removing a SIM Card
To remove the SIM card, push the SIM card in. The device ejects the SIM card.
Installing the Device
1.
Connect antennas to the antenna connectors.
2.
Connect the USB connector to your computer or other USB high power device, such as a hub.
3.
The POWER LED lights after the device powers up.
Mounting Device to Flat Surface
1.
Locate the groove on the bottom of the device.
2.
Slide the mounting bracket through the groove.
