tint-STARTER SET
58
INSTRUCTION MANUAL
Inserting the batteries
1. Open the battery compartment at the rear of the tint
remote control.
2. Insert 2 LR03 (AAA) / 1.5v batteries as shown on
the bottom of the battery compartment. Ensure the
correct polarity of the batteries (+/-).
3. Close the battery compartment cover again.
Using the wall bracket (optional)
You can use the wall bracket (supplied) to store the tint remote control
safely. A magnet in the bracket will hold the tint remote control safely in
the bracket.
The bracket can be mounted on a surface of your choice with adhesive
strips or screws and wall plugs if required.
The bracket will still attract metal objects, even without any adhesive or
screws.
Mounting the wall bracket
1. Remove the protective film from both sticky pads.
2. Press the bracket with some force against a clean, dry and dust-free
surface.
Screwing in the wall bracket
Depending on the surface, the wall bracket can be attached to the wall
with screws and wall plugs if required. Screws and wall plugs are inclu-
ded with the bracket.
