For your safety
EU declaration of conformity
1
31302713-02-US
V9.20191001
9
When retrofitting a machine with electrical and electronic farm equipment and/or components
connected to the vehicle's electrical system, it is your own responsibility to check whether the
installation causes interference with the vehicle's electronic system or other components. This
applies, in particular, to the electronic control of:
▪
electronic hitch control (EHR),
▪
front linkage,
▪
power take off (PTO),
▪
engine,
▪
gear.
The following requirements must be met in order to retrofit mobile communication systems (e.g. radio,
phone):
▪
All farm equipment must be approved and installed in accordance with the regulations applicable
in the respective country.
▪
The equipment must be installed as a fixed installation.
▪
The operation of portable or mobile farm equipment in the interior of the vehicle is only permitted
via a connection to a permanently installed exterior antenna.
▪
The transmitting part must be spatially separated from the vehicle's electronic system.
▪
When attaching the antenna, pay attention to proper installation, including a sound ground
connection between the antenna and the vehicle's ground wire.
For information on wiring and installation as well as the maximum allowable current consumption,
please also refer to the installation guide provided by the machine manufacturer.
EU declaration of conformity
Herewith we declare that the design and construction of this product and its identical variants, as well
as the form brought onto the market by us, is in accordance with the relevant safety and health
requirements of the EU Directive of Electromagnetic Compatibility 2014/30/EU. If alterations are
made to the product without prior consultations with us, this declaration becomes invalid.
TRACK-Guide III
Harmonised standards applied:
EN ISO 14982:2009
(EMC Directive 2014/30/EU)
User responsibility
Additional requirements
1.6
