Product description
Meaning of the LED lights
2
V7.20170405
7
also applies if, after one year has passed, you use the field limits, guidance
lines, obstacles, etc. in the TRACK-Leader application from the previous year.
Meaning of the LED lights
The GPS receiver has three LED lights, which display the current state of the GPS
receiver.
Green LED light
Red LED light
Yellow LED light
▪ Green:
– Flashing: The GPS receiver is searching for WAAS and EGNOS correction
signals
– Lit: The GPS receiver is using WAAS and EGNOS correction signals.
▪ Yellow:
– Flashing: The GPS receiver is receiving GPS or GLONASS signals.
– Lit: The GPS receiver has calculated the current position.
▪ Red:
– Lit: The GPS receiver is ready (approx. 30 seconds after the terminal is
switched on).
If you selected the selected the values "GPS/GLONASS GLIDE 1" or
GPS/GLONASS GLIDE 2"" during Configuration [
10], the green LED is not used.
The GPS receiver will only use the internal correction signal.
2.2
