MuL Technologies 4 Series, User Manual

Page: 15 / 44

15
Unpacking and getting started
Remember to retain all the original packaging and shipping materials for MARC. These materials have been
custom made to ship MARC units and are the best option for any future shipping needs of the system to
avoid damages during shipment.
1. Place the unit on flat, solid surface with space to move around the package.
2. Cut the plastic straps holding the top corrugated cover and discard.
3. Using two people, lift the corrugated cover upward and remove.
4. Loosen and remove the 2 ratcheting straps holding MARC to the pallet.
5. Using two people, lift MARC upward and remove from pallet.
6. Unbox the battery (packaged separately), making sure to remove the
keys from the packaging.
o Battery may need to be charged before use, please see
Charging the batteries
on page
29
.
o Insert key and verify the battery remains in the unlocked position (#1 below).
o Slide the battery onto the rails on the system battery holder (#2) and push till engaged.
o Turn the key to the “On” position (#3).

This will lock the battery in place and offer power to MARC.

To move from unlocked position to “Locked with power off” position, it is important to push the
key inward slightly and then release slowly while turning the key to the next position.
o For additional information, see Inserting the battery pack into MARC on page 31 .
❶
❸
❷
❺
❹