19
Premium (15-button) EZ-Go Navigation system overview
Station buttons 1-13 display in grey when they are
not
programmed for a specific destination. Press and
hold a grey button until you hear the double-beep indication (approximately 3 seconds) to program that
station with the unit’s current location. The button will
then turn green indicating it is programmed.
Station buttons 1-13 display in green when they are programmed for a specific destination. Tap these
buttons to send the unit to its destination designated for the specific number pressed.
CLEARING:
If you wish to clear a set location for a station button, press and hold the button for more than
6 seconds but less than 10 seconds until you hear the triple-beep indication. When released, the button
will return to a grey color.
REPROGRAMMING:
If you wish to set a programmed button to its current location, press and hold the
button for approximately 3 seconds until you hear the double-beep indication.
Under normal operating conditions, the bottom right button
is reserved to display the battery’s current
charge status. This button also allows users to switch between the first and second screens.
The Save Map button is used to save or erase the currently mapped area and also used to indicate the
current map status. The button appears grey if there is currently not a saved map (Active Map Mode) and
green when a map is saved (Fixed Map Mode). To save a map, press the button for 3 seconds till the
double-beep confirmation is heard. The button will turn green and the audio cue “Map saved” will be
heard. To erase the currently saved map, press the map button for 6 seconds but less than 10 seconds until
you hear the triple-beep tone. The button will turn grey, indicating the map has been erased, and the audio
cue “Map erased” will be heard. When a map is not saved (Active Map Mode), turning the cart off or
rebooting will cause the currently mapped area to be deleted from the system. See
on page
for more information.
A yellow check engine symbol indicates there is an urgent issue with the cart. It is still possible to operate
the cart, but the issue should be addressed as soon as possible. For more information, see
on page
. Press the battery level indicator button to return to the main screen.
Your MARC system may have
a 6-button navigation
system. See next section for
overview.
