
DIGITAL THERMOMETER
Model: OR-700R
SAFETY INSTRUCTIONS
HOW TO USE
PARTS
SPECIFICATIONS
• Do not use this thermometer to measure anything other than body tempera-
ture. Intended use is for oral, axillary, and rectal measurements.
• Do not walk, run, or talk during temperature taking.
• Do not take body temperature readings within 5-10 minutes after being
outdoors, exercising, or bathing.
• Do not use the device near a phone or any other device that may cause electro-
magnetic interference.
• Do not store the unit under direct sunlight, at a high temperature, in high
humidity or dust.
• Do not drop the thermometer, and do not use it if there are signs of damage. If
damaged, do not attempt to repair the device! Contact the Mueller Medical
Customer Service.
• Do not disassemble. See “Replacing the battery” section of this manual for
instructions on how to replace the battery.
• If the instrument is not going to be used for a prolonged period, the batteries
should be removed.
• Do not immerse the thermometer in water or other liquid. Clean and disinfect
the thermometer as described in the "Cleaning and storage" section of this user
manual.
• Clean the device probe before and after each use.
• Keep the thermometer out of the reach of children.
• Body temperature can vary from 97°F (36.1°C) and 99°F (37.2°C) and still be
considered normal. The medically accepted ‘normal’ body temperature is 98.6°F
(37°C). The level of activity, time of day, and other factors may affect body
temperature. A fever is defined as a body temperature that is elevated above the
normal for that person. It is important to determine what is ‘normal’ for an
individual before determining if a fever is present. Tracking an individual’s
temperature on a consistent basis, at the same time every day will help
determine an individual’s ‘normal’ temperature.
Measurement range: 90.0°F (32°C)- 109.9°F (42.9°C)
Accuracy:
95.9°F (35.5°C)-107.6°F (42°C)±0.2°F(0.1°C)
Display resolution: 0.1°F (0.1°C)
Battery:
1.5V, AG3 or LR41
Operating condition: Temperature: 41°F (5°C)-104°F (40°C); Humidity: 15%-85%RH
Storage condition: Temperature: -4°F - (20°C)- 131°F (55°C); Humidity: 10%-85%RH
OFF
ON
LCD display ON/OFF button
Battery cover
Storage Case
Probe tip
1. Press the ON/OFF button to turn on the thermom-
eter. The unit will beep once and display
2. The thermometer will then show the last measured
temperature, indicated by an “M” in the bottom right
corner of the display.
Note:
To switch between Celsius (°C) and Fahrenheit
(°F), hold the ON/FF button for 3 seconds when
turning on the thermometer.
3. Then, 98.6
˚
F (or 37.0
˚
C) will
appear.
4. When “Lo” and flashing
˚
F (
˚
C)
appear, the thermometer is ready
for measuring temperature.
188.8
e
M
33.7
C
M
37.0
C
98.6
F
OFF
ON