Model: MG-50G
When finished, turn the water off at the spigot (or
Valve
for short-
periods only). Ensure
Valve
is ON, squeeze Spray Nozzle Handle, and
allow excess water to drain. The hose will retract to its original size.
Turn the garden hose
Valve
to the OFF position (Horizontal position).
Connect
Spray Nozzle
(with rubber gasket) to
Male Brass Connector
.
Attach the
Female Brass Connector
(with rubber gasket) to the water
source/spigot.
Open the brass
Valve
to ON (Vertical position). Ensure water pressure
at spigot is at
full pressure
(6 bars recommended). Squeeze
Spray
Nozzle Handle
to release water. Use
Lock
for continuous water flow.
Before use, ensure rubber gaskets are inserted into the
Female Brass
Connector
and bottom of
Spray Nozzle.
These are important to avoid
leaks. 3 Spare gaskets are provided.
Face nozzle where you desire to spray and rotate dial for preferred
Spray Option
.
Gradually turn the water on at spigot and allow the hose to expand to
full length. Do not pull or drag the hose while water is still filling. This
will better protect the hose.
(NOTE: Using a nozzle is recommended to maintain pressure.)
1.
2.
3.
4.
5.
6.
7.
8.
Instructions
Garden Hose
Expandable
